Skip to content
Call now
5.0 · 138 Google reviews · All Sydney
Servicing all of Sydney, NSW Licence No. 362395C ABN 48 005 397 211
5.0 · 138 Google reviews
24/7 emergency Same-day service across Sydney
$0 call-out fee Even on weekends
Call John now 0402 115 877
BOOK NOW

Licensed plumbers · Billi Tap Installation

Billi Tap Installation, What to Sort Before Install Day

A smooth Billi tap installation depends on a few things being ready before the plumber arrives: enough cupboard space, a power point, a cold water line and a suitable benchtop. Sydney Plumb Jobs checks these with you in advance, then fits, flushes and tests the system at a fixed price.

Pre-install checks done by phone Model guide read before we arrive Old kettle tap or filter removed Handover covers controls and filters

Keep the box, the model number and the installation guide handy, and the visit goes faster.

5.0 from 138 Google reviews
500+ drains cleared in Sydney
10+ yrs servicing Sydney


    Fast response

    Get a free quote

    Same-day reply · $0 call-out · No obligation







    Prefer to talk? Call 0402 115 877 — answered 24/7.

    Licence 362395C 24/7 emergency Sydney local
    Sydney Plumb Jobs plumber on site
    Before you book

    Is Your Kitchen Ready for a Billi Tap?

    Billi systems are designed to be installed by a licensed plumber, and most kitchens can take one. Before booking, check four things: the cupboard under the sink has room for the unit with space around it for air, there is or can be a power point inside, a cold water line is close by, and the benchtop can take a tap hole near the sink.

    If any of these are missing, they are usually easy to sort when planned early.

    In short: Sydney Plumb Jobs is a family-owned, licensed plumber (Licence No. 362395C) providing Billi tap installation across Sydney. We check your cupboard, power and water supply before the visit, fit the tap and under-bench unit to the manufacturer’s guide, connect and flush the filter and test every function. The fixed price comes down to the model, the benchtop, any cupboard changes and whether an old tap or unit comes out. There’s a $0 call-out and same-day bookings are usually available.

    Install day, step by step

    What Happens During a Billi Tap Installation

    On the day, the job follows a set order. The cupboard is cleared, the unit’s position is marked to leave the airflow gap the model requires, and the benchtop hole is checked or drilled. The tap goes in, the cold water line is fitted with an isolation valve, and the filter is connected and flushed so the first glass is clean. The unit then heats and, on chilled models, cools before testing. When that order is skipped, common results are a unit jammed against the back wall, kinked lines and a filter nobody can reach without emptying the cupboard.

    We read the installation guide for your model before arriving, bring the fittings it calls for and leave the cupboard tidy with the filter easy to get to. Before we go, we run each function, check every joint for leaks and show you the child-safety control and filter indicator. Our Zip and Billi installation and servicing page covers both brands in more detail.

    Billi installation pricing

    How Much Does Billi Tap Installation Cost?

    Billi tap installation is quoted as a single fixed price ahead of the job, and photos are often enough to work it out. The call-out is $0. Your price depends on:

    Price driver How it affects the cost
    The model Boiling, chilled and sparkling systems need different connections.
    Benchtop work Using an existing hole is quicker than drilling stone.
    Cupboard changes Shelves or pipes may need moving to make space.
    Removal Taking out an old tap or unit adds a little time.

    Have a quote already? We’ll beat written quotes by up to 15%. Contact us and send the model name plus a cupboard photo.

    Our Billi Tap Installation Work
    01

    Our Billi Tap Installation Work

    • First-time installs: Tap, under-bench unit and filter installed, then set running and tested.
    • Swapping out a kettle tap: Older boiling units or filter taps removed and replaced.
    • Renovation installs: Timed with your builder so the benchtop and joinery suit the unit.
    • Supply upgrades: Isolation valves and fittings added where the existing line falls short.
    • Follow-up checks: A return visit if anything does not feel right after install.
    Billi Taps for Households and Workplaces
    02

    Billi Taps for Households and Workplaces

    At home, the main things to plan are child safety and keeping the cupboard usable for everything else that lives under the sink. In a workplace, the system gets far heavier daily use, so the cupboard needs better airflow and the filter needs changing more often. We set up each installation for how it will be used and can book filter visits afterwards.

    Common questions

    Billi Tap Installation FAQs

    How long does a Billi tap installation take?

    Most Billi tap installations are finished in a single visit once the cupboard, power point and water supply are ready. Drilling stone or moving shelves can add a little time, which we allow for in the quote.

    What do I need to have ready before install day?

    The boxed unit and its guide, a clear cupboard under the sink and, ideally, a power point inside it. If there is no power point, tell us early so a licensed electrician can be arranged.

    How much does Billi tap installation cost?

    It’s one fixed price based on the model, benchtop work, cupboard changes and any removal of an old unit. The call-out is $0 and we beat written quotes by up to 15%.

    Can the unit share a cupboard with a bin or dishwasher plumbing?

    Sometimes, if the model’s clearance and airflow needs can still be met. We check the space against the guide and suggest a layout that keeps everything reachable.

    What happens to my old kettle tap or filter?

    We disconnect and remove it, cap or reuse the fittings as needed and take the old unit away if you would like us to.

    Can you install a Billi in an apartment?

    Yes. Most apartment kitchens can take one. If the work touches common property, check your building’s by-laws first, although most installs stay inside the kitchen cupboard.

    Where do you offer Billi tap installation?

    We fit Billi systems in homes and workplaces right across Sydney, from Manly and Ryde to Penrith and the Sutherland Shire. Find your suburb on our service areas page.

    Book a plumber

    Get a fixed price today

    Don’t wait until a small problem turns into a big one. Send a few details, or a photo, and John will come back with a fixed price. Same-day reply, every time.

    Fastest way to get help 0402 115 877

    Answered 24 hours a day, 7 days a week. $0 call-out fee, even on weekends.

    Emergency drain clearing 24 / 7
    General bookings 7am – 5pm, Mon–Sat
    Coverage All of Sydney, NSW

      Request a free, no-obligation quote







      or call 0402 115 877 — we answer 24/7

      0402 115 877 Free quote