
Licensed gas fitter · Gas Hot Water System
Gas Hot Water System, Fitted and Serviced to Code
A gas hot water system heats water fast and keeps up with busy households, but it must be installed and serviced to strict safety rules. Sydney Plumb Jobs does this work under a gas fitting licence, testing and certifying every job, and helps you weigh storage against continuous flow and natural gas against LPG.
Gas appliances must be worked on by a licensed gas fitter. Ask to see the licence and the compliance certificate.

Why Gas Hot Water Work Needs a Licensed Gas Fitter
Gas units burn fuel to heat water, which means they produce exhaust that must vent safely and rely on fittings that must not leak. Small faults can cause incomplete combustion, carbon monoxide build-up or a gas escape.
For that reason, only a licensed gas fitter may install, repair or service a gas hot water unit, and the finished work has to be tested and backed by a compliance certificate.
In short: Sydney Plumb Jobs is a family-owned, licensed plumber and gas fitter (Licence No. 362395C) installing, servicing and repairing gas hot water systems across Sydney. We work on storage and continuous flow units running on natural gas or LPG, check gas supply, burners and flues, and issue a compliance certificate for all gas work. The fixed price we quote reflects the unit style, gas supply size, flue location and fuel type. There is no call-out fee, same-day bookings are usually available and gas emergencies are answered 24/7.
Choosing the Right Gas Hot Water System Type
Gas systems come in two main styles. A storage unit uses a burner to hold a full tank at temperature, so it suits homes with steady demand and space for a tank. A continuous flow unit heats water only when a tap opens, so it never runs out and takes up little wall space, but it needs a gas supply large enough to fire at full rate. Homes without a mains connection can run either on LPG cylinders. Placement matters too: flues must keep set clearances from windows, doors and eaves, and units in enclosed spaces need proper ventilation to burn safely and efficiently.
We assess your gas supply, the location and your household’s demand before recommending a unit, then install, test and certify it on the same visit. For existing systems, we service burners, check combustion and flues, and repair faults safely. Explore our other hot water options.
How Much Will a Gas Hot Water System Cost?
Installation, servicing and repairs are each quoted at a fixed price. You pay a $0 call-out and never an hourly rate. Your price depends on:
| Price driver | How it affects the cost |
|---|---|
| Unit style | Storage and continuous flow units install differently. |
| Gas supply size | Undersized pipework or meters may need upgrading. |
| Flue and location | Relocating a unit to meet clearances adds work. |
| Natural gas or LPG | Cylinder setups need regulators and supply checks. |
Comparing quotes? We beat written quotes by up to 15%. Contact us for a fixed, certified price.

Gas Systems We Install and Maintain
We work on all the common gas hot water setups:

Safety Warning Signs on a Gas Unit

Servicing Versus Replacement
Regular servicing keeps a gas unit burning cleanly and safely, and most faults come down to one replaceable part. If a storage tank leaks, or parts for an older unit are no longer available, replacement is the sensible step. We explain both and price them side by side.
Common questions
Gas Hot Water System FAQs
Who can install a gas hot water system?
Only a licensed gas fitter. John is a licensed plumber and gas fitter (Licence No. 362395C), and every gas job is pressure tested and handed over with a compliance certificate.
Is storage or continuous flow better?
Continuous flow suits households that want endless hot water and have enough gas supply. Storage suits steady demand or smaller gas connections. We assess your home and recommend the better fit.
Can I have gas hot water without a mains connection?
Yes. Both storage and continuous flow units can run on LPG cylinders. We check the cylinder setup, regulator and supply to make sure the unit performs properly.
What is a compliance certificate?
It is the document a licensed gas fitter issues after testing their work, confirming it meets the required standards. Keep it with your home records.
What price should I expect for a gas hot water system?
It depends on the unit style, your gas supply, the flue and location, and whether it runs on natural gas or LPG. You get a fixed price first, a $0 call-out, and we beat written quotes by up to 15%.
How often should a gas unit be serviced?
Periodic servicing keeps combustion clean and catches worn parts early. We can recommend an interval based on the unit, its age and where it is installed.
Do you install gas hot water systems in my suburb?
We install and service gas units across all of Sydney, from Hornsby to Liverpool. Find your suburb on our service areas page.
Book a plumber
Get a fixed price today
Don't wait until a small problem turns into a big one. Send a few details, or a photo, and John will come back with a fixed price. Same-day reply, every time.
Answered 24 hours a day, 7 days a week. $0 call-out fee, even on weekends.