
Licensed drainage plumbers · Sewer Pump Repairs
Sewer Pump Repairs, Understanding Your Pump Station
Sewer pump repairs are easier to understand once you know how the system works. Sydney Plumb Jobs explains each part of a domestic pump station, from the pit and float to the check valve and alarm, finds which one has failed and repairs it at a fixed price, with sewer emergencies answered 24/7.
New to a property with a sewer pump? Find the pit, the control box and the alarm now, before you ever need them.

How a Sewer Pump System Works
A sewer pump system collects waste from the house in a sealed pit. When the level rises, a float switch starts a submersible pump that pushes waste up a pressure pipe, called a rising main, to the gravity sewer. A check valve stops it flowing back, and a high-level alarm warns if the pit fills.
Sewer pump repairs usually mean finding which of these parts has stopped doing its job, and fixing that part properly.
In short: Sydney Plumb Jobs is a family-owned, licensed plumber (Licence No. 362395C), and homes and small businesses around Sydney call us for sewer pump repairs. We test and repair every part of a domestic or small commercial pump station, including pumps, floats, check valves, rising mains, alarms and control boxes, and replace pumps that are beyond repair. Your fixed price depends on which part has failed, the depth and condition of the pit, access and whether a new pump is needed. Emergency calls are taken 24/7, call-outs cost $0 and nights or weekends add no surcharge.
Where Sewer Pump Systems Go Wrong
Each part has its own way of failing. Floats tangle in their cables or stick with grease, so the pump never starts or never stops. Impellers jam on wipes, cloths and hair. Check valves wear and let waste run back, so the pump restarts again and again. Rising mains can crack or block, leaving the pump running without emptying the pit. Alarms fail silently when batteries or sensors die, and control boxes trip after storms and power surges. Left alone, a weak part tends to wear out the motor, and an overflowing pit can release sewage into the yard or the house.
We isolate power, lower the pit level if needed and work through the system in order, from the control box to the float, pump, check valve and rising main, so the real fault is fixed rather than only the most visible one. If the pump is beyond repair, we choose a replacement sized for the pit depth and how high it must push waste. Read more about our sewer and water pump repairs.
How Much Do Sewer Pump Repairs Cost?
Sewer pump repairs are priced as a fixed amount once we know which part has failed, and the call-out is $0 at any hour, with nothing extra after hours. Your price depends on:
| Price driver | How it affects the cost |
|---|---|
| Failed component | A float or alarm is simpler than a pump or rising main. |
| Pit condition | Fouled pits need pumping out and cleaning first. |
| Pit depth | Deeper pits make lifting the pump slower. |
| Replacement sizing | A new pump must suit the lift and the household. |
Already received a quote? We’ll beat written quotes by up to 15%. Contact us for a fixed price.

Sewer Pump Parts We Repair and Replace

Keeping a Sewer Pump Out of Trouble
Most repeat failures come from what goes down the drains. Only toilet paper should be flushed, fats belong in the bin and wipes, even those labelled flushable, should never go in the toilet. Test the alarm now and then, keep the pit lid clear and call us if the pump starts, stops or sounds different. During a power cut, use as little water as possible until power returns.
Common questions
Sewer Pump Repairs FAQs
What do sewer pump repairs usually involve?
Sewer pump repairs start with testing the control box, float, pump, check valve and rising main to find the failed part. We then clear, repair or replace it and test the whole system before leaving.
Why does my sewer pump keep running?
A pump that will not stop often has a stuck float, a worn check valve letting waste flow back or a blocked rising main. Running constantly wears the motor, so it is worth checking soon.
How much do sewer pump repairs cost?
You get a fixed price once we know the failed component, pit condition, pit depth and whether a new pump is needed. The call-out is $0 and we beat written quotes by up to 15%.
Are flushable wipes safe for a sewer pump?
No. Wipes do not break down quickly and are one of the main causes of jammed impellers and stuck floats. Put them in the bin, along with sanitary items and cooking fats.
What happens to my sewer pump in a blackout?
The pump cannot run without power, so the pit slowly fills as water is used. Keep water use to a minimum until power returns, then check the pump restarts and the alarm is quiet.
How do I know my sewer pump alarm works?
Many alarm panels have a test button. If yours stays silent when tested, or you are unsure how it works, we can check it and replace a faulty alarm.
Do you carry out sewer pump repairs in my area?
Yes. We repair sewer pumps across Greater Sydney, including steep blocks in Hornsby, Pittwater, the Blue Mountains foothills and the Sutherland Shire. Find your suburb on our service areas page.
Book a plumber
Get a fixed price today
Don't wait until a small problem turns into a big one. Send a few details, or a photo, and John will come back with a fixed price. Same-day reply, every time.
Answered 24 hours a day, 7 days a week. $0 call-out fee, even on weekends.