Skip to content
Call now
5.0 · 138 Google reviews · All Sydney
Servicing all of Sydney, NSW Licence No. 362395C ABN 48 005 397 211
5.0 · 138 Google reviews
24/7 emergency Same-day service across Sydney
$0 call-out fee Even on weekends
Call John now 0402 115 877
BOOK NOW

Licensed plumber · Toilet and Tap Repair Services

Toilet and Tap Repair Services, Repaired Properly, Not Patched

Toilet and tap repair services should leave you with a fitting that works for years, not a quick patch that fails next month. Sydney Plumb Jobs diagnoses the fault, uses parts made for your fitting, tests the result and tells you plainly when replacing makes more sense than repairing.

Fault found before parts are fitted Repair or replace advice upfront Every repair checked under pressure Several fixtures, one booking

Not sure if a small drip or a noisy cistern is worth calling a plumber about? Ring us and we'll tell you over the phone.

5.0 from 138 Google reviews
500+ drains cleared in Sydney
10+ yrs servicing Sydney


    Fast response

    Get a free quote

    Same-day reply · $0 call-out · No obligation







    Prefer to talk? Call 0402 115 877 — answered 24/7.

    Licence 362395C 24/7 emergency Sydney local
    Sydney Plumb Jobs plumber on site
    Fixture repairs explained

    What Good Toilet and Tap Repair Services Should Include

    Taps and toilets are the fittings people use most, so they wear first. A professional repair is more than swapping a washer: it means identifying the exact fitting, finding which part has failed and why, checking the isolation valve and connections nearby, and testing under normal pressure before calling the job done.

    Skipping any of those steps is the usual reason a repaired fixture starts leaking again.

    In short: Sydney Plumb Jobs is a family-owned, licensed plumber (Licence No. 362395C) offering toilet and tap repair services across Sydney. We diagnose and fix dripping taps, mixers, running cisterns, weak flushes, leaking connections and worn fixtures, and replace fittings that are no longer worth repairing. Price drivers include the type of fitting, the parts required, access to the fixture and whether a replacement is needed, all agreed as a fixed price first. Call-outs are $0, same-day bookings are usually available and most repairs are finished in one visit.

    Repair or replace

    When Toilet and Tap Repair Services Beat Buying New

    Most tap and toilet faults come down to a small rubber or ceramic part that has worn out: a washer, an O-ring, a cartridge, an inlet valve or a flush seal. Hard use, high water pressure and age all speed that wear up. The early signs are easy to spot once you know them: a handle that needs extra force to close, a cistern that hisses between flushes, a damp patch under the vanity or a flush button that sticks. Left alone, worn parts tend to damage the parts around them, so a cheap fix can turn into a full replacement.

    Our rule is simple. If the tap body or toilet suite is sound and parts are still available, we repair it. If it is corroded, cracked or obsolete, we explain why and quote a replacement, using a fitting we supply or one you have chosen. Either way the work is tested before we leave. See our taps, toilets and fixtures page for the full range.

    Repair service prices

    How Much Should Toilet and Tap Repair Services Cost?

    Every repair is priced as a fixed amount once we have seen the fitting, with a $0 call-out and no hourly rate. Your price depends on:

    Price driver How it affects the cost
    Fitting design Older two-handle taps and exposed cisterns are quicker to work on than modern mixers or in-wall units.
    Part availability Common parts are on the van, while uncommon ones may need sourcing.
    Hidden wear Corroded connections or a worn tap seat add a little extra work.
    Number of fixtures Fixing several items in one visit spreads the cost.

    Already have a quote? We’ll beat written quotes by up to 15%. Contact us and list every fixture that needs attention.

    Fixtures We Repair Every Week
    01

    Fixtures We Repair Every Week

    The everyday fittings that make up most of our repair work.

    • Basin, kitchen and laundry taps: Pillar taps and lever mixers brought back to a clean, firm shut-off.
    • Shower and bath sets: Wall taps and mixers resealed behind the tiles where possible.
    • Toilet cisterns: Inlet valves, flush valves and buttons replaced to match the model.
    • Pan connectors and seals: Leaks at the floor or wall traced and resealed.
    • Isolation valves and hoses: Stiff valves and tired braided hoses swapped while we are on site.
    Clear Pricing for Small Repairs
    02

    Clear Pricing for Small Repairs

    Small repairs deserve the same care as big jobs, and the same clear price. We look at the fitting first, then give you one fixed price covering parts and labour before any work starts. If a repair would only buy you a few months, we say so and put the replacement option beside it, so the choice is yours. Most fixture repairs are finished in a single visit.

    Common questions

    Toilet and Tap Repair Services FAQs

    Do your toilet and tap repair services cover the whole house?

    Yes. Our toilet and tap repair services cover kitchen, bathroom, laundry and outdoor taps, every type of toilet and the valves and hoses that feed them. List everything when you book and we price it all together.

    Can I fix a dripping tap or running toilet myself?

    Some people can, but the common trap is fitting the wrong part or overtightening, which damages the tap seat or cistern. If the fault returns after a DIY fix, a plumber can usually find the real cause quickly.

    How much do toilet and tap repair services cost?

    Cost comes down to the fitting, the parts it takes, how easy it is to reach and whether replacing is better value. We name one fixed figure once we have looked, charge $0 to come out, and beat written quotes by up to 15%.

    How do I know if a tap or toilet should be replaced?

    Cracks in a pan or cistern, corrosion through a tap body, or parts that are no longer made are the usual signs. If none of those apply, a repair is normally the better option.

    Will you fit a tap or toilet I bought myself?

    Yes, as long as it is WaterMark certified and suits your plumbing. We check the connections and the space before fitting, then test it under normal pressure.

    What should I do if a toilet or tap will not stop running?

    Turn off the isolation valve under the basin or behind the toilet. If there isn’t one, or it won’t turn, shut the main water tap at the meter and call us.

    Do you provide toilet and tap repairs in my area?

    We repair taps and toilets for homes, units and businesses right across Sydney, from the coast to the western suburbs. Find your suburb on our service areas page.

    Book a plumber

    Get a fixed price today

    Don't wait until a small problem turns into a big one. Send a few details, or a photo, and John will come back with a fixed price. Same-day reply, every time.

    Fastest way to get help 0402 115 877

    Answered 24 hours a day, 7 days a week. $0 call-out fee, even on weekends.

    Emergency drain clearing 24 / 7
    General bookings 7am – 5pm, Mon–Sat
    Coverage All of Sydney, NSW

      Request a free, no-obligation quote







      or call 0402 115 877 — we answer 24/7

      0402 115 877 Free quote