
Filtered tap care · Zip Tap Service
Zip Tap Service, Explained Step by Step
A Zip tap service keeps a boiling and chilled unit safe, efficient and tasting right. Sydney Plumb Jobs explains what a service covers, how often one is needed and which signs mean it is overdue, then changes filters, checks heating, chilling and airflow, and quotes a fixed price before starting.
Filter light on, or can't remember the last service? It is probably time to book one in.

What a Zip Tap Service Involves
Under the bench, a Zip unit heats water to boiling, chills it and passes it through a filter. Each part works best when it is kept clean. Filters trap sediment and chlorine taste until they are full, scale forms on heating parts over time, and the chiller needs a steady flow of cool air.
A service resets all three. Skip it, and you tend to notice slow flow, flat-tasting water, longer waits for boiling water and a unit that runs more than it should.
In short: Sydney Plumb Jobs is a family-owned, licensed plumber (Licence No. 362395C), and homes and workplaces around Sydney book us for Zip tap service. A service covers filter replacement, flushing, checks of boiling and chilled performance, a look at ventilation and fittings and advice on any fault found. The fixed price is set by the model, the filter kit it uses, any parts needed and how many units are on site. There’s a $0 call-out, and most services are finished in a single visit.
How Often Does a Zip Tap Need Servicing?
How often depends on use and water quality. A household tap used a few times a day goes much longer between filter changes than an office unit filling cups all morning, and harder water builds scale faster. Most units have a filter indicator, but it only tracks the filter. Other signs a service is overdue include water tasting of chlorine, a slower stream, steam or spitting from the spout, a unit that clicks on and off often, or chilled water that is barely cool. A warm, stuffy cupboard is another clue that the unit is working too hard.
Our Zip tap service follows the same checklist each time: isolate the unit, replace and flush the filter, check heating and chilling, look for leaks at every fitting, clear anything blocking airflow and record the date. If a part has failed, we explain the options and give a fixed price before any repair. See our full Zip and Billi servicing page.
How Much Should a Zip Tap Service Cost?
Every Zip tap service is quoted as a fixed price before we begin, with a $0 call-out. Your price depends on:
| Price driver | How it affects the cost |
|---|---|
| Filter kit | Different Zip models take different filter cartridges. |
| Condition of the unit | Heavy scale or a blocked vent takes longer to sort out. |
| Any repairs | Replacing a failed part is quoted separately first. |
| Units on site | Workplaces with several taps can book them together. |
Comparing service quotes? We’ll beat written quotes by up to 15%. Contact us to book your service.

What a Service Visit Covers

Servicing Zip Taps at Home Versus at Work
In a home kitchen, a service is usually a quick visit that keeps water tasting fresh. In a workplace the unit may be one of the busiest appliances in the building, so servicing tends to be more frequent and the cupboard is often warmer. For offices we can work outside busy hours and keep a record of each unit’s filter dates.
Common questions
Zip Tap Service FAQs
What is included in a Zip tap service?
A Zip tap service includes a new filter, a flush, checks of boiling and chilled performance, clearing the ventilation and inspecting fittings for leaks. Any fault we find is explained with a fixed price before repair.
How do I know my Zip tap needs a service?
Watch for the filter indicator, chlorine taste, slower flow, spitting from the spout, frequent cycling or water that is not properly cold. Any of these suggests a service is due.
What will a Zip tap service cost me?
It’s a fixed price based on the filter kit, the unit’s condition, any repairs and how many units are on site. The call-out is $0 and we beat written quotes by up to 15%.
Can I change the filter myself?
Some owners do, following the model’s guide. A full service also checks heating, chilling, ventilation and fittings, which is where small faults are usually caught before they become repairs.
Why is my chilled water not cold enough?
The most common cause is poor airflow around the unit, often from items packed into the cupboard or a blocked vent. A cooling fault is also possible, and we check both.
Is it worth servicing an older unit?
Usually, yes. A fresh filter and clean vents often restore performance. If a major part has failed on an older unit, we compare the repair price with replacement so you can decide.
Where do you offer Zip tap service?
We service Zip units in homes and offices across Sydney, including the CBD, Macquarie Park, Parramatta and the Northern Beaches. Find your suburb on our service areas page.
Book a plumber
Get a fixed price today
Don’t wait until a small problem turns into a big one. Send a few details, or a photo, and John will come back with a fixed price. Same-day reply, every time.
Answered 24 hours a day, 7 days a week. $0 call-out fee, even on weekends.